Showing posts with label Centerfire Systems. Show all posts
Showing posts with label Centerfire Systems. Show all posts

Wednesday, March 27, 2019

Croatian .22 LR conversion for 7.62x39mm stamped AKs

To continue more of the .22LR AK theme lately of this semi-defunct blog, today I received my Croatian Grizzly Defense Industries (no website) AK .22LR conversion kit from Centerfire Systems (currently sold out).  This seems to be the same conversion kit that was shown and SHOT Show 2019 as covered by The Firearm Blog. That article also does a great job of explaining why it is only for stamped AKs in 7.62x39. I did contact Armamentos at the listed website and filled out their contact page when I saw the TFB article but never received a reply.  These are definitely different than the Ciener .22 AK conversions that he no longer has in production.  Also note that this conversion kit claims standard, not high velocity, .22LR.

First unfired impressions are that it looks maybe even better than Romanian standards on the AKT98/WASR22/RAK-22. It isn't super hard to install as long as you push down on the hammer.  I was hoping the barrel insert would be past the gas port to possibly prevent fouling, but it is definitely shorter.  However, it may be just short enough not to cause lead "misting" like that I see inside the blast chamber of a .22 suppressor.  Clean up will be one of my questions along with ejected cases getting stuck under the dust cover (common WASR22 platform issue), but right now the bigger issue is with the magazines.  The magazines are robust with a BHO follower.  However, similar to my Chiappa RAK-22 with the Black Dog Machine WASR22 magazines, the magazine doesn't latch all the way in on my recent Romanian build with Nodak Spud NDS-3 receiver.  When I get more time tonight I will update this post with some other AK fitting tests.

UPDATE: Mag latch is only an issue with one rifle, doesn't seem totbe a fault of the conversion kit.  It fits my M92 built off a Morrissey underfolder receiver and Yugo mag latch, another rifle built off an Romanian parts kit, and a MAK-90.  The instructions say that other than Yugo or Romanian AKs may need "minor gunsmithing," but it at least installed in the MAK-90 easily. 

One other observation, the bolt handle is located much further back than even the WASR22.  When uusingit for training and not just plinking I think I will still try to index where the normal bolt handle is and move back to catch it.  Not the best solution but otherwise it is potentially a better training tool than the WASR22 if you have AKs that are setup multiple ways.










Sunday, August 7, 2011

Colorado Guns M10 .22LR

Speaking of .22 LR AKs and Colorado Guns' M10, they have one in .22 LR. Centerfire systems has them in stock. Seems to be a WASR22 with a Draco Gas Block (but the gas block in this case isn't functional since .22 AKs tend to be direct blowback). If it is a new production WASR22 platform it could mean more spare parts for other WASR22 owners. Previously, the imported WASR22 were military surplus trainers and supposedly they had all dried up.

Thursday, March 11, 2010

New AK74


Sorry for the slow posts lately! I got a new Bulgarian kit on NDS-2 AK74 in my arsenal. It was one of those blow out deals that Centerfire Systems was offering for $350 shipped! BTW, it is featured as the first article in the new Guns & Ammo Complete Book of the AK.

The Nodak NDS-2 seems to be good quality albeit no frills. The other 922r parts it has the Tapco G2 FCG, Century pistol grip, and Tapco stock.

I can't tell if Century's handguard that looks like a polymer version of Yugo handguards is U.S. or not. If it was I would change out the stock for a Polish wire folder today, but it looks like I'll have to wait on a U.S. handguard for that.

It did come with surplus Circle 21 and Circle Ten mags.

The gas piston is very clean but not U.S. marked. The brake seems to be original with zig zag cuts and side ports on it (IIRC most U.S. 74 brakes don't have those details). The crown is clean under the brake as well. It os a parts gun without matching serial numbers. Overall for a second string, first time 5.45x39 rifle it should be a great purchase pending a round at the range.

As long as it shoots ok I should be very happy with the purchase. It is much nicer than my WASR10/63, which I'm selling to offset the cost of this rifle. BTW, the WASR had version 2 of that horrid paint job in the banner of this site that looked only marginally better (it was my first Krylon job). My MAK90 now has a pretty good OD base with black furniture that looks much better. But since I'm looking to sell the WASR the paint job must go. One reason A lot of people recommend Krylon over Duracoat etc. since it can "easily" be removed. I would say that yes, a lot of the paint comes off easily but there are a lot of places I've had to go at with a toothbrush to remove and it's NOT easy or quick. I'll only be painting my "keeper" rifles from now on.